English
Français
한국어
AC33, 2ml-4800ml, hochreiner Aluminiumoxid-Tiegel
$4.0 – $449.0
Variations – 2ml-4800ml, Rectangle & Square Alumina Crucible
| Code | Outer Dim(L×W×H) | Wall Thickness | Capacity | Material | ID of Compatible Furnace |
|---|---|---|---|---|---|
| AC3301 | 50×10×10mm | 2mm | 2ml | 99% Alumina | >15mm |
| AC3302 | 70×12×7mm | 2mm | 2.5ml | 99% Alumina | >15mm |
| AC3303 | 80×10×10mm | 1.5mm | 4.5ml | 99% Alumina | >13mm |
| AC3304 | 50×25×10mm | 2mm | 7ml | 99% Alumina | >30mm |
| AC3305 | 75×20×20mm | 3mm | 15ml | 99% Alumina | >26mm |
| AC3306 | 150×20×20mm | 3mm | 34ml | 99% Alumina | >23mm |
| AC3307 | 75×75×15mm | 3mm | 57ml | 99% Alumina | >86mm |
| AC3308 | 65×65×25mm | 4mm | 68ml | 99% Alumina | >69mm |
| AC3309 | 120×60×18mm | 3mm | 85ml | 99% Alumina | >64mm |
| AC3310 | 120×60×18mm | 4mm | 80ml | 99% Alumina | >63mm |
| AC3311 | 120×60×20mm | 4mm | 90ml | 99% Alumina | >64mm |
| AC3312 | 65×65×35mm | 2.6mm | 115ml | 99% Alumina | >70mm |
| AC3313 | 90×65×30mm | 4mm | 120ml | 99% Alumina | >69mm |
| AC3314 | 90×65×40mm | 3mm | 165ml | 99% Alumina | >69mm |
| AC3315 | 90×90×30mm | 4mm | 170ml | 99% Alumina | >95mm |
| AC3316 | 80×80×40mm | 4mm | 185ml | 99% Alumina | >85mm |
| AC3317 | 140×140×38mm | 6mm | 520ml | 99% Alumina | >145mm |
| AC3318 | 150×110×80mm | 5mm | 1000ml | 99% Alumina | >115mm |
| AC3319 | 140×160×120mm | 7mm | 2000ml | 99% Alumina | >160mm |
| AC3320 | 200×200×80mm | 6mm | 2600ml | 99% Alumina | >209mm |
| AC3321 | 250×250×100mm | 9mm | 4800ml | 99% Alumina | >255mm |
Hinweis zu Tiegelabmessungen
Es gibt große Unterschiede bei den Abmessungen der Aluminiumoxid-Tiegel zwischen vor und nach dem Brennen.
Wenn Ihnen die Tiegelgröße besonders wichtig ist, kontaktieren Sie uns bitte, um Ihnen die tatsächlichen Abmessungen des gewünschten Tiegels mitzuteilen.
MUST-KNOW nach Erhalt
- Please bake the crucible in the oven at 105℃ for 120 minutes to remove moisture content before the first use.
- DO NOT use open flame or direct heating equipment to heat the crucible, please make sure to use box muffle furnace with temperature control system.
- DO NOT heat up or cool down too fast, The temperature change below 1200℃ should be less than 5℃/ min, and the temperature change above 1200℃ should be less than 4℃/ min.
- When cooling the crucible, it is recommended to turn on the temperature control to cool down. Turning off the power at high temperature may lead to product cracking if the cooling speed is too fast in the early cooling stage.
- Der Abstand zwischen dem Produkt und dem Heizelement (wie Kohlerohr, Silizium-Molybdän-Stab oder Heizdraht usw.) sollte> 5cm.
- Der Boden eines großen Tiegels sollte den Boden des Ofens nicht direkt berühren. Es wird empfohlen, Korundgummiauflagen oder andere temperaturbeständige Materialien zum Anheben des Tiegels (wie im rechten Bild gezeigt) zu verwenden, um eine Luftkonvektion zu bilden und die Lebensdauer des Tiegels zu verlängern.
